Horizontal Boring and Milling Machine

Mighty Viper offers the PBM-135 precision CNC horizontal boring and milling machine with a rotary table.

Mighty Viper’s PBM-135 CNC horizontal boring and milling machine with rotary table and oversized boxway design is said to provide stable, precision positioning accuracy and effective cutting capability for various applications. In addition, a wide base and column structure increases rigidity and damping capability, the company says.

The machine’s 5.11"-diameter spindle has a W axis that provides 28" of horizontal travel using two linear ways for accurate quill movement, while combined W- and Y-axis movement is engineered to automatically compensate for mechanical quill sagging, the company says. Its gear-driven spindle with four-step speed change provides up to 4,680 foot-pounds of torque. The 50-hp, 2,500-rpm spindle motor can be equipped with a variety of spindle heads, including a universal head, a 90-degree head, a 90-degree extension head and a quill support.

The rotary table offers positioning accuracy of ±10 arcseconds. The standard table can accommodate a load of 16,000 lbs, while an optional table offers a capacity of 26,400 lbs. A large-capacity cooling system is available for all spindle, cartridge, gearbox and hydraulic systems. ATC capacity ranges from 60 to 160 tools.

 

Related Suppliers

Editor Pick

FlexBeam's Open Design Provides Unrestricted Access

FlexCNC’s Beam Line is a machining center for large or long parts, such as structural steel beams or cutting keyways, in a single set-up.

RELATED CONTENT

  • Composites Machining for the F-35

    Lockheed Martin’s precision machining of composite skin sections for the F-35 provides part of the reason why this plane saves money for U.S. taxpayers. That machining makes the plane compelling in ways that have led other countries to take up some of the cost. Here is a look at a high-value, highly engineered machining process for the Joint Strike Fighter aircraft.

  • When Spindle Speed is a Constraint

    Though it won’t replace high speed machining, Boeing sees “low speed machining” as a viable supplement to higher-rpm machines. Using new tools and techniques, a shop’s lower-rpm machining centers can realize much more of their potential productivity in milling aluminum aircraft parts.

  • Drilling Deep Holes On A VMC

    The recipe for best results is simple: Start with a rigid machine, add a high pressure through-the-spindle coolant system, then combine these with the right drill geometry plus the right speeds and feeds.