Laser Scan Micrometer Provides Accuracy Down to 0.3 Micron
Mitutoyo America Corp. has released the LSM-6902H laser scan micrometer, a non-contact, high-accuracy measurement system designed for measuring pin gages or plug gages.
Share
Mitutoyo America Corp. has released the LSM-6902H laser scan micrometer, a non-contact, high-accuracy measurement system designed for measuring pin gages or plug gages.
The system features an accuracy of ±0.5 micron over the entire measuring range and a higher accuracy of ±(0.3 + 0.1ΔD) micron over a narrow range. The LSM-6902H has a resolution ranging from 0.01 to 10 microns (0.000001" to 0.0005"), a scanning rate of 1,600 scans/sec. and a laser scanning speed of 112 m/sec.
The sensor system’s scanning motor enables measurement accuracy down to 0.3 micron. The LSM-6902H is said to have excellent gage repeatability and reproducibility since measurements do not contact the workpiece. The standard output is RS-232C with analog I/O module. An optional two-channel digimatic code output unit is also available.
Related Content
-
More Surface Finish Parameters at Hand
Measuring surface finish at the point of manufacture is often done by the same machinist who is manufacturing the part. They need tools that meet test requirements and are easy to use.
-
Turning Fixed-Body Plug Gages Inside Out
Fixed-body mechanical plug gages provide fast, high-performance measurement for tight-tolerance holes.
-
Measuring Torque, Thrust Force for Smart Drilling Operations
To monitor drilling operations for smart manufacturing solutions, torque and thrust force can be measured.
