• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
5/23/2019

Rego-Fix's Securgrip Toolholders Prevent Cutter Slippage

Originally titled 'Toolholders Prevent Cutter Slippage'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Made to fit with existing Powrgrip clamping units, Rego-Fix’s heavy duty Securgrip toolholders are designed to prevent cutter pullout during machining operations. 

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Made to fit with existing Powrgrip clamping units, Rego-Fix’s heavy duty Securgrip toolholders are designed to prevent cutter pullout during machining operations. The holders use the same balance rings as standard PG holders while enabling increased feed rates and surface finishes with less deflection, the company says. The Securgrip system makes use of the Powrgrip’s gripping strength with a special locking system and threaded cap.

The product has a total indicator reading of 0.001" and enables manufacturers to preset their tool heights. Furthermore, users can modify their existing Powrgrip holders for use with the system. Securgrip can be used with Rego-Fix PG 25 or PG 32 holders in all tapers, including CAT, BT, TC, HSK, Capto, and dual-contact Rego Plus.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Modern Machine Shop in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Be Kind To To Your Collets

    Collet toolholders are too important to the machining process to use them incorrectly. Follow this simple advice.  

  • The Benefits and Limitations of Machining With an Angle Head

    Far from being outdated by the latest machine tool technology, angle heads often prove an ideal complement by pushing done-in-one capabilities even further. Proper application, however, requires attention to their limitations as well as their benefits.

  • Measuring Taper For Toolholders And Spindle Applications

    Companies concerned about strict quality requirements regularly check toolholder tapers for wear or inaccuracy because these conditions can jeopardize the results of a critical operation. However, a shop can check tapers quickly and reliably with air gages. These devices can be used effectively without special operator training. For measuring taper in a production environment, few other methods can match the speed and performance of air, as multiple-circuit air jets can be placed in very small taper gages.

Related Topics

Resources