• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
6/9/2014

Vise Jaws Enable Workholding Versatility

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Mitee-Bite's VersaGrip vise jaw system clamps standard vise work as well as difficult applications that would normally require fixturing or machining soft jaws.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Mitee-Bite's VersaGrip vise jaw system clamps standard vise work as well as difficult applications that would normally require fixturing or machining soft jaws. The system’s teeth are designed to dig into the workpiece, preventing any movement. The jaw system can hold multiple workpieces in a single cycle and accommodates a range of sizes and types, including casting, flame-cut workpieces, and pieces with negative drafts.  

RELATED CONTENT

  • Pins: The Alternative To Parallels

    These vise jaws use protruding, mechanical pins to repeatedly support workpieces either horizontally or at angles. They are said to allow quicker setups than conventional parallels.

  • Bar Puller Basics

    Bar pullers are cost-effective alternatives to enable automated turning on CNC lathes. This article explains how they work and how shops can benefit from using them.

  • Holding Small Parts for Effective Machining on a CNC Router

    A non-woven porous material with a special coating enables vacuum chucks and tables to hold sheets of metal and other materials more effectively on CNC routing machines. The material, called Vilmill, is used as a substrate between the sheet or plate material to be machined and a suitable vacuum table or vacuum chuck where it is held securely in place by the vacuum.

Related Topics

Resources