Walter USA has released Walter Cut MX grooving inserts.
Different chipbreakers are engineered for different parameters. Machining footage shows the difference in effectiveness between chipbreakers used in the right and the wrong applications.
Machining footage of different coatings in both roughing and finishing passes reveals how choosing the right coating can have a dramatic effect on the performance of the process.
Röhm’s Duro-A RC power chuck reduces setup times because of its quick jaw-change system that enables the jaws to be adjusted, reversed or swapped out in 50 seconds.
See cuts and force profiles corresponding to tool failure, built-up edge and a tool that is too positive for the setup.
Sandvik Coromant’s CB7125 and CB7135 grades are said to enable the performance of medium-to-heavy interrupted cuts and removal of the hardened layer (depth of cut up to 2 mm) in case- and induction-hardened steel components.
The A60 and AG60 Walter Cut MX indexable grooving inserts for small- to medium-pitch threads deliver multiple advantages.