Mikron Corp.

200 Main St. - Unit 2A
Monroe, CT 06468 US

Machine Division

A Message from Mikron Corp.

As Seen In Modern Machine Shop

The Mikron Multistar CX-24 rotary indexing machines.

Mikron Multistar CX-24 Shortens Cycle Times
EMO 2019: The Mikron Multistar CX-24 rotary indexing machines produce simple and complex turned and milled parts finished in a single clamping.

Transfer Machine’s Removable Spindles Ease Tool Presetting
Mikron’s Multistar transfer machine enables complete machining of small precision parts in large production volumes.

Dual-Station Transfer System Machines on Six Faces in One Setup
Mikron’s Ideo 2 dual-station transfer machining system is designed for the execution of complex geometric machining on six faces in a single clamping.

Toyoda’s FA1050S 5-Axis

March 2016 Product Spotlight Slideshow: Machining Centers
This month’s Modern Equipment Review Spotlight focuses on horizontal, vertical and five-axis machining centers.

Mikron Multistep XT-200

Machining Center Turns, Mills, Drills on 5 ½ Sides of Workpiece
The Mikron Multistep XT-200 machines challenging workpieces in a single clamping operation and with a chip-to-chip time of less than 1 sec.

Small Drill Designed for Stainless Steel Cutting
With bad thermal conductivity, high ductility and long chips, stainless steel cutting is a challenge even for machining specialists.

solid carbide milling cutters with match head for scale

Managing the Micro-Milling Process with Tiny Cutters
The engineering of this line of small end mills brings out both the challenges and opportunities in milling hard-to-machine materials on a micro scale.

 CrazyDrill Flex microdrills

Deep Holes with a Carbide Microdrill That Flexes
These microdrills combine the advantages of HSS with those of solid carbide.

Carbide Micro Drill Offers Flexibility
CrazyDrill Flex from Mikron Tool combines the flexibility of an HSS drill with the increased tool life and precision of a solid carbide drill.

Drill Program For Small Diameter Ranges
Mikron Tool’s drill program for small diameter ranges includes the MiquMill Frontchamfer. Available in diameters as small as 1 mm, the mini chamfer mill is designed to machine hard-to-reach spots.

Dual-Feature Center Drill
The CrazyDrill Twicenter from Mikron Tool features two integrated coolant ducts and a double cutting point. The integrated ducts supply coolant directly to the drill’s cutting edge, so no additional external cooling is needed. Bringing the coolant to the cutting edge is a challenge for drilling—and consequently when centering—in difficult-to-access places.

Product Categories of Mikron Corp.

Cut to Length Machines
Horizontal Machining Centers, Five-Axis
Machining Flex Lines
Maintenance & Repair
Transfer Machines, Dial Index
Transfer Machines, In-Line
Transfer Machines, Rotary
Transfer Machines, Trunnion

Trade Names

CrazyDrill Alu
CrazyDrill Cool
CrazyDrill Crosspilot
CrazyDrill Pilot
CrazyDrill Steel
CrazyDrill Twicenter
CrazyMill Cool
Mikron NAM
Mikron NRG-50
MiquDrill 200
MiquDrill 210
MiquDrill Centro