Mitee-Bite Products LLC Suppliers Showroom

When Too Many Customers Spoil the Part

Duo CNC used to take on as many customers as the shop could handle. But when growth stalled, a top-down audit by the company’s general manager revealed that its customer base was inhibiting growth — and causing the shop to be less efficient and productive.

Niche Work If You Can Get It: A CNC Machine Shop Crafts Its Own Destiny

The latest innovations in metalworking aren’t always related to CNC automation or robotics. For Rosenberger North America, a 2022 Top Shops Honoree, it is the company’s niche processes that create the biggest successes.

Workholding Solutions for Longer, Unattended Machining

IMTS22: Mitee-Bite Products showcases its range of workholding solutions and design services.

New Horizons with a New Horizontal Machining Center

A sudden surge in orders for a part used in COVID diagnostic equipment forced CBM Industries to quickly adapt to its first horizontal machining center, including the challenges of fixturing and lights-out machining.

Clamping Solution Facilitates Large-Part Vertical Machining

Mitee-Bite Products’ fixtures demonstrated their powerful clamping support in a project with Akron Gear & Engineering to vertically hold a 1-ton ring during machining.

Mitee-Bite's Concentric OD Clamping Device Provides High Repeatability

Compact and offering repeatability to within ten thousandths of an inch, the device is said to be suitable for high-density applications.

Mitee-Bite Adds Long-Length Grip for TalonGrip Jaw Set

Mitee-Bite’s TalonGrip long-length serrated grip are designed to fit with the original 6" TalonGrip jaw set and provide line contact with the full length of workpiece.

Modular Fixturing Offers 10 Configurations

Eastec 2019: The X-Plate system from Mitee-Bite Products is a versatile modular fixturing platform for three-, four- and five-axis applications.

System Simplifies Workholding for Grid Plates, Tombstones

IMTS 2018: The Mitee-Bite Loc-Down system is designed for quick and simple securing of parts from small to large in size.

Modular Clamp System Reduces Tooling Interference

Mitee-Bite Products offers its fixture clamps in a modular system, including clamps, grips and stops designed to be fully adjustable while mounted on T-slot tables or the company’s aluminum T-Slot grid plate.

Vise Jaws Enable Workholding Versatility

Mitee-Bite's VersaGrip vise jaw system clamps standard vise work as well as difficult applications that would normally require fixturing or machining soft jaws.

Vise Jaw System Holds Irregular Workpieces

The VersaGrip vise jaw system from Mitee-Bite is designed to offer the versatility of clamping standard vise work as well as workpieces that would normally require fixturing or machining soft jaws.

The “Headless Bolt” Fixturing Alternative

This fastener enables fast workpiece change-overs compared to conventional bolts and less cutter interference thanks to its compact design.

Headless Bolt Secures Aerospace Parts

Mitee-Bite’s Loc-Down system enables the quick attachment or removal of plates and workpieces from sub-plates.

Cramming for Competitiveness

Low-profile clamps contribute to the high-density fixturing this shop needs to make the most of an equipment configuration that is increasingly renowned for reducing setups and keeping the spindle turning.

Loc-Jaw System for Fourth and Fifth Axis Machining

The Loc-Jaw system for fourth and fifth axis machining is said to require no material preparation.

A Different Approach to Tool-Break Detection

A standard feature on the CNC of this shop's workhorse machine helps improve confidence in unattended runs.

Clamping System for Four-, Five-Axis Machining

The Loc-Jaw system from Mitee-Bite is designed for use in four- and five-axis machining.

Manual Actuators for Gripping ID of Blind Holes

Mitee-Bite’s manual actuator is designed for the ID gripping of blind holes and various other applications.

“Lean” CMM Workholding Features Quick Part Change

Designed to compliment intelligent CMMs, Mitee-Bite’s “lean” line of workholding products are designed to increase productivity by enabling one-handed part swaps.

Vise Jaw System Grips Oddly Shaped Parts

Mitee-Bite’s VersaGrip can clamp standard vise work as well as difficult parts that would normally require fixturing or machining soft-jaws.

Grind Nonferrous Materials On A Magnetic Chuck

Mitee-Bite’s VM100 vacuum system is primarily designed for grinding nonferrous materials on a magnetic chuck. The system, which can be used as a pallet changer, accepts a standard 14" × 12" vacuum pallet.

Mitee-Bite Products LLC

CONNECT

About Mitee-Bite Products LLC

IS THIS YOUR COMPANY?

Video Gallery

Rotary Vacuum Chuck

New Broached Tapered ID Screw

Snap-Down

OK Vise Clamp Video

As Seen On Modern Machine Shop

Mitee-Bite Products LLC Supplies the Following Products

Trade Names Offered by Mitee-Bite Products LLC

Editorial, News, and Products